SPECIFICATIONS


ENGINE

Description Type Capacities Part Number Global Part Number
U.S. Metric
Cooling System *
♦ Engine Coolant (2.4L Engine) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 7.2 Quarts 6.8 Liters 68163848AB 68163848GB
♦ Engine Coolant (3.6L Engine) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 8.7 Quarts 8.2 Liters 68163848AB 68163848GB
Engine Oil with Filter
♦♦ Engine Oil – Non ACEA Categories (2.4L Engine) We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. 5.5 Quarts 5.2 Liters 68218950AB 68218950GA
♦♦ Engine Oil – ACEA Categories (2.4L Engine) We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. 5.5 Quarts 5.2 Liters 68218950AB 68218950GA
♦♦♦ Engine Oil – Non ACEA Categories (3.6L Engine) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. 6.0 Quarts 5.6 Liters 68218890AB 68218890GB
♦♦♦ Engine Oil – ACEA Categories (3.6L Engine) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. 6.0 Quarts 5.6 Liters 68218890AB 68218890GB
Engine Oil Filter (2.4L Engine) MOPAR® Engine Oil Filter N/A N/A
Engine Oil Filter (3.6L Engine) MOPAR® Engine Oil Filter N/A N/A
Fuel (approximate)
Fuel Selection (2.4L Engine) 87 Octane Unleaded (R+M/2) 15.8 Gallons 60.0 Liters
Fuel Selection (3.6L Engines) 87–89 Octane Unleaded (R+M/2) 15.8 Gallons 60.0 Liters
A/C Refrigerant System
Refrigerant R-1234yf 1.06 Pounds 0.482 Kilograms 68224028AB 68224028GA
* Includes heater and coolant recovery bottle filled to MAX level.
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ SAE 5W-20 engine oil approved to MS-6395 or 9.55535–CR1 may be used when SAE 0W-20 engine oil is not available. Please ensure that you switch back to 0W-20 for the next oil change, as indicated by your vehicles automatic oil change indicator.
♦♦♦ SAE 5W-30 engine oil approved to MS-6395 or 9.55535–CR1 may be used when SAE 5W-20 engine oil is not available.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Gap
U.S. Metric
Spark Plugs (2.4L Engine) 0.047 in 1.20 mm
Spark Plugs (3.6L Engine) 0.043 in 1.10 mm

TRANSAXLE

Description Type Capacity Part Number Global Part Number
948TE Automatic Transaxle Use only MOPAR® ZF 8&9 Speed ATF™Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 6.0 L (6.35 Quarts) 68218925AA 68218925GA
948TE Overhaul Fill (Refer to 21 - Transmission and Transfer Case/Automatic - 948TE/FLUID and FILTER/Standard Procedure)

CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
♦ Brake Master Cylinder We recommend you use MOPAR® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. N/A N/A 68218041AA 68218041GA
Rear Differential 70W-80 Gear Lube One Speed - 0.94 Quarts One Speed - 0.89 Liters 68227765AA
Synthetic Hydraulic Control Fluid 0.46 Quarts 0.439 Liters 68227766AA
One Speed PTU 75W-90 Gear Lube 0.74 Quarts 0.70 Liters 68218655AA 68218655GA
♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 is acceptable.