SPECIFICATIONS


ENGINE

Description Type Capacities Part Number Global Part Number
U.S. Metric
Cooling System
♦ Engine Coolant (2.0L Engine) We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Standard MS.90032. 9.0 Quarts 8.6 Liters 68163848AB 68163848GB
♦ Engine Coolant (2.4L Engine) We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Standard MS.90032. 7.2 Quarts 6.8 Liters 68163848AB 68163848GB
♦ Engine Coolant (3.2L Engine) We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Standard MS.90032. 10 Quarts 9.5 Liters 68163848AB 68163848GB
♦ Engine Coolant (2.2L Diesel Engine) We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Standard MS.90032. 7.2 Quarts 6.8 Liters 68163848AB 68163848GB
Engine Oil with Filter
Engine Oil - (2.0L Engine) We recommend you use Mopar API SN PLUS Certified SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of FCA Material Standard MS-13340. If SN PLUS or equivalent oil is unavailable then use SAE 0W-30 ACEA C2/API SN Full Synthetic Engine Oil which meets the requirements of FCA Material Standard 9.55535-GS, such as SELENIA DIGITEK.

CAUTION: Failure to use the recommended SN PLUS or equivalent oil can cause engine damage not covered by the vehicle warranty.

5 Quarts 4.7 Liters 05166241PA 05166241GA
Engine Oil - (2.0L Engine) - Canada We recommend you use Mopar API SN PLUS Certified SAE 5W-30 Full Synthetic Engine Oil which meets the requirements of FCA Material Standard MS-13340. If SN PLUS or equivalent oil is unavailable then use SAE 0W-30 ACEA C2/API SN Full Synthetic Engine Oil which meets the requirements of FCA Material Standard 9.55535-GS, such as SELENIA DIGITEK.

CAUTION: Failure to use the recommended SN PLUS or equivalent oil can cause engine damage not covered by the vehicle warranty.

5 Quarts 4.7 Liters N/A 05166241CA
♦♦ Engine Oil - NAFTA (2.4L Engine) We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 5.5 Quarts 5.2 Liters 68218950AB 68218950GA
♦♦ Engine Oil - EXPORT (2.4L Engine) We recommend you use API Certified SAE 0W-20 Engine Oil, such as Mopar, Pennzoil, Shell Helix or equivalent meeting the requirements of FCA Material Standard MS-6395 or ACEA A1/B1. Refer to your engine oil filler cap for correct SAE grade. 5.5 Quarts 5.2 Liters 68218950AB 68218950GA
♦♦♦ Engine Oil - NAFTA (3.2L Engine) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 6.0 Quarts 5.6 Liters 68218890AB 68218890GB
♦♦♦ Engine Oil - EXPORT (3.2L Engine) We recommend you use API Certified SAE 5W-20 Engine Oil, such as Mopar, Pennzoil, Shell Helix or equivalent meeting the requirements of FCA Material Standard MS-6395 or ACEA A1/B1. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to FCA Material Standard MS-6395 or ACEA A1/B1 such as Pennzoil or Shell Helix may be used when SAE 5W-20 engine oil is not available. 6.0 Quarts 5.6 Liters 68218890AB 68218890GB
Engine Oil - (2.2L Diesel Engine) For best performance and maximum protection under all types of operating conditions, the manufacturer recommends Fully Synthetic Low Ash 0W- 30 engine oils that meet the requirements of FCA Material Standard Standard 9.55535-DS1, MS.90047 and ACEA C2. If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed. The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty. 4.5 Quarts 4.3 Liters N/A 68291576GA
Fuel (approximate)
Fuel Selection (2.0L Engines) 87 Octane (R+M)/2, 0-15% Ethanol. 15.8 Gallons 60.0 Liters
Fuel Selection (2.4L and 3.2L Engines) 87 Octane, 0-15% Ethanol. Export - 2.4L 91 Research Octane Number (RON) (EN228 Specifications) Export - 3.2L 91-93 Research Octane Number (RON) (EN228 Specifications) 15.8 Gallons 60.0 Liters
Fuel Selection (2.2L Diesel Engines) Specification EN590 15.8 Gallons 60.0 Liters
Additive for Diesel Emissions (UREA) - If Equipped Adblue (Urea-Water Solution) According to DIN 70 070 and ISO 22241-1 4.3 Gallons 16.3 Liters
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ SAE 5W-20 engine oil approved to MS-6395 or 9.55535-CR1 may be used when SAE 0W-20 engine oil is not available. Please ensure that you switch back to 0W-20 for the next oil change, as indicated by your vehicles automatic oil change indicator.
♦♦♦ SAE 5W-30 engine oil approved to MS-6395 or 9.55535-CR1 may be used when SAE 5W-20 engine oil is not available.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Gap
U.S. Metric
Spark Plugs (2.0L Engine) We recommend you use Mopar Spark Plugs. 0.023 — 0.025 in 0.60 — 0.65 mm
Spark Plugs (2.4L Engine) We recommend you use Mopar Spark Plugs. 0.047 in 1.20 mm
Spark Plugs (3.2L Engine) We recommend you use Mopar Spark Plugs. 0.043 in 1.10 mm

TRANSAXLE

Description Type Capacity Part Number Global Part Number
948TE Automatic Transaxle Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 6.0 L (6.35 Quarts) 68218925AA 68218925GA
948TE Overhaul Fill (Refer to 21 - Transmission and Transfer Case/Automatic - 948TE/FLUID and FILTER/Standard Procedure) .
C635 Manual Transaxle We recommend you use Mopar C635 DDCT/MTX Transmission Fluid. 1.7 Liter (1.8 Quarts) 68092630AA 68092630GA

CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
Brake Master Cylinder We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids. N/A N/A 04318080AD 04318080GC
One Speed - PTU 75W-90 Gear Lube 0.74 Quarts 0.70 Liters 68218655AA 68218655GA
Two Speed - PTU 75W-90 Gear Lube 1.06 Quarts 01.20 Liters 68218655AA 68218655GA
One Speed - Rear Differential 70W-80 Gear Lube One Speed - As Required One Speed - As Required 68227765AA 68227765GA
Two Speed - Rear Differential 70W-80 Gear Lube Two Speed - 1.22 Quarts Two-Speed With Locker - 1.3 Quarts Two Speed - 1.15 Liters Two-Speed With Locker - 1.23 Liters 68227765AA 68227765GA
Synthetic Hydraulic Control Fluid 0.46 Quarts 0.439 Liters 68227766AA 68227766GA

AIR CONDITIONING

Description Type Capacities Part Number Global Part Number
U.S. Metric
Refrigerant R-1234yf (2.0L) 0.875 Pounds 0.397 Kilograms 68224028AB 68224028GA
Refrigerant R-1234yf (2.4L/3.2L) 1.06 Pounds 0.482 Kilograms 68224028AB 68224028GA
Refrigerant R-1234yf (2.2L) 1.12 Pounds 0.510 Kilograms 68224028AB 68224028GA
Refrigerant R-134a (2.0L) 1.06 Pounds 0.482 Kilograms 82300101AC 82300101GB
Refrigerant R-134a (2.2L /2.4L/ 3.2L) 1.19 Pounds 0.539 Kilograms 82300101AC 82300101GB
Refrigerant Oil (2.0L) FD46XG - - 05114554AC 05114554GC
Refrigerant Oil (2.2L /2.4L/ 3.2L) ND-12 - - 68224150AB 68224150GB
Refrigerant Oil A/C Receiver/Dryer 1.0 oz. 30 ml. - -
Refrigerant Oil A/C Condenser 1.0 oz. 30 ml. - -
Refrigerant Oil A/C Evaporator 1.5 oz 45 ml. - -
Refrigerant Oil A/C Compressor - (2.0L) 4.1 oz. 120 ml. - -
(Refer to 24 - Heating and Air Conditioning/Plumbing/OIL, Refrigerant/Standard Procedure) .
Refrigerant Oil A/C Compressor - (2.2L /2.4L/ 3.2L) 4.6 oz. 130 ml. - -
(Refer to 24 - Heating and Air Conditioning/Plumbing/OIL, Refrigerant/Standard Procedure) .